For maximum effectiveness, a display must have the capability to adjust brightness levels for correct intensity and high contrast according to ambient light conditions during any time of day. At night, during lower light conditions......
Along with proper brightness, a display must have high contrast for good readability. Contrast is the difference between the background’s “off state” (blank display area) versus the “on state” (illuminated display area)......
The color and brightness emitted by an :ED are determined by the chemical composition and construction. Single-color (monochrome) displays are made up of one color of LEDs, whereas full-color displays contain LEDs that emit red, green and blue light......
The operational lifetime od an LED Display is determined by the lifetime of the LEDs. LED Manufacturers estimate the LED lifetime to be 100,000 hours under certain operating conditions. LED display end of lifetimes is when the frontal brightness has decreated to 50% of original brightness......
“LED” is an abbreviation for “Light emitting diode”. An LED is a solid-state electronic device than emits light when energized by applying power. The LED die is mounted to a lead frame(see right) which is encapsulated in an epoxy lens......
When sufficient voltage is applied to the chip across the leads of the LED, electrons can move easily in only one direction across the junction between the p and n regions. In the p region there are many more positive than negative charges......
LED stands for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household.......
LED's are special diodes that emit light when connected in a circuit. They are frequently used as "pilot" lights in electronic appliances to indicate whether the circuit is closed or not.......
It's may hard to explain why rgb this 3 colors can make millions colors by words.
But just play this game you will get it by youself.......
The factory was moved. We retained the relative expert from Taiwan for this movement, who specialized in designing the factory facility and treating the anti-static. Therefore, all of the equipment of our factory .......
led_screen 
led_signs@hotmail.com 
ledmanufacturer
ICQ:456723491
manager@chipshow.comTEl:86-755-83419012
TEl:86-755-83893997
FAX:86-755-82975893Mobile:86-15914111145Mobile:86-13510192145Mobile:86-1379836552Certificate 
